Imágenes adicionales

Altavoz JBL Synthesis

JBL Synthesis 2-1/2-way Triple 8” In-wall Loudspeaker (pieza) Negro Matte


Código: 19-SCL-2

SCL-2 

  • 2½-way, triple 8-inch/200mm driver configuration – ideal for wall mount
  • 5.9-inch/150mm deep, rectangular footprint enclosure
  • Can be mounted vertically or horizontally for maximum application flexibility and performance
  • Computer-optimized HDI Constant Directivity Horn with very smooth and predictable off-axis behavior over a wide coverage area
  • D2415K, 1.5-inch/37.9mm annular ring Teonex® diaphragm compression driver with advanced HDI geometry horn
  • Powerful cast-frame, Advanced Aluminum Matrix cone woofers with low-distortion neodymium motor structures
  • Sonoglass® baffle with integrated HDI waveguide for maximum strength and high internal damping
  • Solid MDF enclosure installs behind drywall and provides optimized acoustic performance and enhanced acoustic isolation from the wall
  • Rubber isolation mounts attach cabinet to wall studs, ensuring a firm yet isolated mounting
  • Bi-Wire and Bi-Amp capable network using gold-plated binding posts on rear enclosure, and an easy Molex® baffle to network connection
  • Zero-bezel, magnetically-attached grille can be painted to match décor

General Specifications

Speaker type 2½-way in-wall loudspeaker
Low frequency transducer Three 8” (200mm) cast-frame, Advanced Aluminum Matrix cone woofers
Mid/High frequency transducer D2415K, 1.5” (38mm), dual annular ring Teonex® diaphragm compression driver mounted to Sonoglass® horn/baffle
445 Watts RMS (CEA-426B specification, calculated onto the SCL-2 rated load impedance)
Frequency response (-6 dB on-axis) 57 Hz – 25 kHz
Coverage area (-6dB@20kHz) 80 x 70 Degrees (Hor x Vert)
Coverage area (-6dB@10kHz) 100 x 100 Degrees (Hor x Vert)
Sensitivity (2.83V@1m) 92dB
Nominal Impedance 6 Ohm
Crossover frequencies 225Hz; 1.3kHz
Enclosure type Sealed in-wall mount with included back box
Inputs Dual gold-plated binding posts
Finished grille dimensions (H x W) 40.2” x 12.8” (1020.8mm x 325.5mm)
Cutout dimensions with backbox (H x W) 38.25” x 11.5” (971.6mm x 292.1mm)
Mounting depth with backbox 5.8” (147mm)
Weight 53.5 lb (24.3 kg)
Finishes Matte Black with white paintable grille