Imágenes adicionales
EA-RSP-2D-200_Front-2z
EA-RSP-2D-200_Front-2z
EA-RSP-2D-200_Front-2z
EA-RSP-2D-200_Front-2z

Amplificador Episode

Episode Response DSP Amplifier 200 W x 2 Channels(pieza)Negro


Código: 01-EA-RSP-2D-200

Episode® Response Series DSP Amplifiers

This Episode Response Series amplifier takes multiroom audio to the next level, giving pros a DSP amp that delivers incredible audio in a single zone. This amp utilizes high-tech digital signal processing, a single analog input and bridgeable speaker output to provide clean and accurate audio in any space. It is also IP controlled, OvrC compatible, and has drivers for all popular control systems for an easy-to-control audio experience. With this amp, simply add a source and you're set.

EA-RSP-2D-200 on a rack

Clean and Fast Installs

Save space and time with the Response Series amps. It has a pre-amp, DSP, matrix switch, and amplification built-in to a single chassis, which saves rack space and cuts down on wiring to make your job easier – all while delivering superior sound.

Benefits of a Digital Signal Processor

Digital Signal Processor, or DSPs, are essential in creating great sound. The built-in DSP delivers stellar audio in a variety of spaces with its onboard 10-band parametric EQ, letting you and your customer find the perfect sound via a browser UI.

Response Series Control System Integration

Control System Integration

Response Series amps easily integrate with Control4 and other popular control systems. With a full set of pre-built drivers, it’s just a matter of dropping in a file to integrate with the control system of your choice.

EA-RSP-2D-200 ir port image

IP Controlled

Equipped with IP control, this amp is not only a breeze to automate, but it’s also easily configured during your install, giving you and your customers a flawless experience with easy monitoring and control. For legacy installs, control Response Series amps with the built-in IR port.

Image of the back of the Response 2D 200

Sub Out in Every Zone

Dedicated subwoofer outputs per zone make wiring and configuration simple and fast, letting you add an Episode architectural subwoofer and digital subwoofer amplifier to any room. Adding a subwoofer gives your customers full-frequency audio that delivers a rich and full audio experience that's incredibly accurate and satisfying.

Smart & Powerful

This amp pumps out 200 watts per channel at 4-ohm and 100 watts at 8-ohm for powerful multiroom audio. Additionally, each Response Series amp is IP controlled, OvrC enabled, and features Signal Sensing and a 12v trigger for power saving - making these amps easy to integrate and easy to use.

Image of the back of the Response 2D 200

Reliable Amplification

These amps feature an active variable/dynamic cooling system to increase longevity. They also feature anti-clipping technology that protects both the amp and speakers from being overdriven. Rackmount ears are included and pre-installed for easy mounting.

Superior Sound

Built-in Signature by Episode presets make these amps the perfect match for our flagship speaker line, delivering the best sound every time. Plus, you can create, backup, and upload custom presets using built-in test signals and audio analytics. And for detailed audio, each amp has an adjustable low-pass/high-pass filter when using subwoofers.

  EA-RSP-2D-200
Impedance Input
RCA analog input: 22kΩ
Power Output @ 4 ohm
2 channels driven: 2 × 200W 1 kHz
All Channels: 2 × 200W 1 kHz
Power Output @ 8 ohm
2 channels driven: 2 × 100W 1 kHz
All Channels: 2 × 100W 1 kHz
Power Output Bridged @ 8 ohm
1 × 400W 1 kHz
Sensitivity Input
1 Vrms
Topology
Class D
Total Harmonic Distortion (THD)
0.01% 1 kHz @1/8 rated power 4Ω or 8Ω
Connector Type
1 x RJ45 (ethernet), Stereo RCA inputs, 1x Analog loop output, 2 channels: 1 stereo or bridged output Speaker outputs
Fan Description
Fanless (passive) cooling
Frequency Response
20 Hz - 20 kHz < ± 2 dB
Power Connection Type
NEMA 5/15P 3 prong to IEC 60320 C13, 1.8m length
Certifications
UL, CE, FCC
Dimensions (W x H x D)
16.5 × 8.3 × 1.8 in. (420 × 211 × 44.5 mm)
With feet: 16.5 × 8.3 × 2.2 in. (420 × 211 × 56 mm)
Operating Humidity
20-90% RH
Operating Temperature
-10 to +50 °C (+14 to +122 °F) (indoor)
Power Consumption
200W
Storage Temperature
-30 to +70 °C (-22 to +158 °F)
Weight
7.93 lb (3.6 kg)
Signal to Noise Ratio
>95 dB A-weighted @ rated power
Nominal Impedance
1 ohm
RJ45 Auto Sensing
2.5 mVrms
LED Indicators
Front power LED: 1x Blue LED light bar
  System status LED: 2x Bi-color LED
Dynamic Range
> 100 dB A-weighted @ rated power