The Soundweb London Digital Output card is designed to populate any of the four card slots on Soundweb London BLU-800, BLU-805, BLU-806, BLU-320, BLU-325, BLU-326, BLU-160, BLU-120, BLU-80, BLU-32 and BLU-16 devices. These digital cards enable Soundweb London devices to receive AES/EBU and S/PDIF audio signals.
The Digital Output Card can be configured in the following ways:
- 2 Stereo AES/EBU Signals
- 1 Stereo AES/EBU signal / 1 Stereo S/PDIF Signal
- 2 Stereo S/PDIF Signals
The Digital Output Card has two Combicon connectors which are used as follows:
- Connector 1
- Stereo Audio, Channels 1 and 2 - AES/EBU / S/PDIF
- Stereo Audio, Channels 3 and 4 - AES/EBU / S/PDIF
- Connector 2*
- Clock Input - High Impedance
- Clock Input - 75R Terminated
* active clock selected within HiQnet London Architect
| Connector | [Clock Input] | [Audio Output] | ||
|---|---|---|---|---|
| Signal | 3&4 | 1&2 | 3&4 | 1&2 |
| Pin | [S + -] | [S + -] | [S + -] | [S + -] |
| Clock Input | Positive: to + | AES/EBU | Positive: to + | S/PDIF | Signal: to + |
|---|---|---|---|---|---|
| Negative: to - | Negative: to - | Signal Ground: to - | |||
| nil or -: to S | Shield: to S | Shield*: to S | |||
| * Short "S" to "-" for unshielded cable | |||||
Specifications
| Digital Outputs | 4 |
| Digital Output Type | AES/EBU and S/PDIF |
| Word Sync Input |  |
