Strong™ Rack Sliding Base for In-Cabinet Racks (Black)
Designed for use with our SR-CAB and SR-CS (Contractor Series) rack lines, the SR-RACKSLIDE-300 saves your back and neck by giving you easy access to equipment when installing it into a cabinet.
Beefy Rails
Even though the main point of the railing system isn't to permanently hold the rack at an extended position, it's important that they look and feel Strong. Built with 16 gauge steel, the 4 slides are beefy enough to hold up to 300 lbs full extended. And with ball bearing glides, you can count on a nice, smooth ride.
Un-Lazy Susan
Get your gear on the move easily with this sliding and rotating shelf. When installing or servicing equipment you can also secure it with two locking features. The first is a rotation lock for 0, 60 and 90 degrees from center stops to keep it stationary and not twist. The second is a glide lock to prevent accidentally sliding the rack back if you push on the front.
Good Rotation
Sure sliding the rack out is easy, but then what? Since you need to get to the back to connect wires, check wires, possibly reposition equipment, etc, the base of the slide sits on an aluminum "lazy-susan" so you can easily spin the rack around.
Simple Installation
Installation couldn't be any easier - simply mount the shelf in the cabinet then bolt on the assembled rack. We've even included a cover plate that dresses up the front and hides the lockouts from prying fingers.
“Strong” Build Quality
When sliding out your precious gear, you want a Strong base to support it all. Each of the four (yes, four) slides are stamped from 16 gauge steel, making it tough enough to support up to 300 lbs fully extended. Gratuitous use of ball bearings would make Fletch happy - and they'll make your equipment happy too giving it a nice, smooth ride!
Important Note: The SR-RACKSLIDE-300 will add 2.56" to the height needed for the rack installation. Be sure to account for this in your cabinet design.
| Measurements | |
| Combinations: | Total Height |
| SR-CAB-8U (17.43") + SR-RACKSLIDE-300 (2.56"): | 19.99" |
| SR-CAB-10U (20.93") + SR-RACKSLIDE-300 (2.56"): | 23.49" |
| SR-CAB-12U (24.43") + SR-RACKSLIDE-300 (2.56"): | 26.99" |
| SR-CAB-14U (27.93") + SR-RACKSLIDE-300 (2.56"): | 30.49" |
| SR-CS-RACK-12U (23.78") + SR-RACKSLIDE-300 (2.56"): | 26.34" |
| SR-CS-RACK-16U (30.87") + SR-RACKSLIDE-300 (2.56"): | 33.43" |
| SR-CS-RACK-21U (39.53") + SR-RACKSLIDE-300 (2.56"): | 42.09" |
Product Contents
(1) Rackslide Base
(1) Rack Attachment Plate
(2) Blank Finish Plates ( 1 for each series rack)
(2) Side Mounting Plates
(22) Assembly Screws
(6) 5/16” x 2 ½” Lag Bolts
(6) ½” Washers
(6) Concrete Anchors
| Specifications | |
|---|---|
| Unit Dimensions: | 2.56 x 19.76 x 20.16 (H x W x D) |
| Max Loadable Weight: | 300 Lbs. |
| Construction (Material, Welds, Paint): | 1.5mm Thick Steel (16 Gauge), Powder Coat Black |
| Tilt / Swivel Degrees / Distance from the wall: | Swivel & Lock at 0, 60 and 90 degrees |
| Slide Out Distance: | 20.67” |
| Hardware Included: | Blank Security Cover Panel, (2) attachment panels, attachment screws |
| Weight: | 42.5 lbs |
| Height: | 2.56 in. |
| Comparable Products: | MA SRSR Raxess ROTR Lowell LPT4 |
